Support:DigitalArtLIVE

From Headus Docs

(Difference between revisions)

Jump to: navigation, search

Current revision

[edit] Preload leon obj into CySlice

[edit] 36925890

[edit] Skype

jill@headus.com.au M77*

[edit] Webinar

Mastering UVLayout : Comprehensive Tips and Tricks from the Author

Show overview

[edit] The Core Mechanic

I'll be saying "Flattening" a lot, so here's a quick look at what I mean by that exactly.

Knowing whats going on behind the GUI can only help. Rubber ball demo.

explain heat map, red compression (texture stretched), blue tension (texture squashed)

seams vs distortion

[edit] Setting Up UVLayout

ping main gui for position and 3D window size

floating panels, how to pin

preference for restore GUI panels

other preferences

select Edit LMB pick style

select Save Auto Save

Load file, remembered folders,

also Dir button under Windows

explain kbstate ... shows hotkeys being used.

not so much for live, but when you look back at the recording.

[edit] Cutting

There's more than one way to skin a cat (apologies to cat lovers).

It doesn't have to be perfect first time. Its a process of discovery ... you can try out different schemes. Cut, flatten, see how it goes, then adjust seams by detaching and welding.

Even if the plan is for a single piece "pelt" layout, better to cut and flatten many pieces, optimize them for minimum distortion, then join them back up again.

If you're really happy with how a piece is looking, then just use B key over join, not general optimize.

turn on D drag mode

killeroo example, legs separate or joined etc HERE preview uvsets There is no one perfect solution. Even for the one object, there can be UVs for diffuse color mapping, normal maps, lightfield maps, particle (hair) seeding.

Chassis sample, segment threshold

couch, G key, facing, and other rectangle selects.

plyedit preview for polygon select

[edit] Flattening

difference between F, Space-F, Shift-F, B, and Run All in optimize

plus Live editing

here look at slow smooth optimize preference

also look at defining F1 for Run All / Edit -> Settings

[edit] Welding

often easier in 3D view,

LMB select in uv view, then home/. in 3d view to locate

use M, or Shift-M

green select and move and rotate before weld

look at Segment Fast Weld option

[edit] Kinks

What they are, why the occur, how to get rid of them.

Ctrl-Shift MMB drag

Shift MMB drag

Shift B

Internal kink

can check with Optimize Overlap detection

use 4 to shrink a bit, and then B brush

turn on display4/5

[edit] Geometry to UVs

The relationship between the flattened shapes and UV coordinates, and how that impacts on other tools such as scaling and packing.

so don't scale shells up and down to fit UV square, move square around to fit shapes.

this maintains texture density across the loaded object,

also across all assets but fixing the UV scale.

so use auto fit, or probably pack.

having said that, there are tools for varying the scale, hand example.

[edit] Green Balance

Where you need to use it. plugins

select already flattened, click green balance

select rest, rescale U & V

[edit] Advanced Packing

continue with leon and cube file

pack selected only

pack quality

turn on coverage %

rotate with 0, whats that?

try wrapping

[edit] Subdivision Surfaces

Why they need special handling.

[edit] Obscure Tools

Niche usage, but handy to keep in mind.

Camera scaling

probably in combination with render repaint

Reshape (eg Phileroo),

[edit] Easter Eggs

F8, F9, UV Sets?

[edit] Pattern Making

Costume. Tip: Use Segment tool.

load edit01.uvl

triangles better than quads, less ambiguity

use segment with 0 degree

set scale to size of paper/material

if not square, make b/w mask image

pack with no resize and mask on

folded aluminium face test

Harry sculpture

Retrieved from "http://www.headus.com/doc/Support:DigitalArtLIVE"

-== Webinar ==
+__NOTOC__
+== Preload leon obj into CySlice ==
+== 36925890 ==
+== Skype ==
+jill@headus.com.au M77*
+== Webinar ==
 '''Mastering UVLayout : Comprehensive Tips and Tricks from the Author'''
-{{img|Dino1.jpg|Design}} {{img|Dino2.jpg|Reality}}
+Show overview
+== The Core Mechanic ==
+I'll be saying "'''Flattening'''" a lot, so here's a quick look at what I mean by that exactly.
+Knowing whats going on behind the GUI can only help. Rubber ball demo.
+: explain heat map, red compression (texture stretched), blue tension (texture squashed)
+: seams vs distortion
+== Setting Up UVLayout ==
+: ping main gui for position and 3D window size
+: floating panels, how to pin
+: preference for restore GUI panels
+----
+: other preferences
+: select '''Edit''' LMB pick style
+: select '''Save''' Auto Save
+----
+: Load file, remembered folders,
+: also Dir button under Windows
+----
+: explain kbstate ... shows hotkeys being used.
+: not so much for live, but when you look back at the recording.
+== Cutting ==
+There's more than one way to skin a cat (apologies to cat lovers).
+It doesn't have to be perfect first time. Its a process of discovery ... you can try out different schemes. Cut, flatten, see how it goes, then adjust seams by detaching and welding.
+Even if the plan is for a single piece "pelt" layout, '''better to cut and flatten many pieces''', optimize them for minimum distortion, then join them back up again.
+If you're really happy with how a piece is looking, then just use B key over join, not general optimize.
+: turn on D drag mode
+'''killeroo example, legs separate or joined etc''' HERE preview uvsets
+There is no one perfect solution. Even for the one object, there can
+be UVs for diffuse color mapping, normal maps, lightfield maps, particle (hair) seeding.
+: Chassis sample, segment threshold
+: couch, G key, facing, and other rectangle selects.
+: plyedit preview for polygon select
+== Flattening ==
+: difference between F, Space-F, Shift-F, B, and Run All in optimize
+: plus Live editing
+: here look at slow smooth optimize preference
+: also look at defining F1 for Run All / Edit -> Settings
+== Welding ==
+: often easier in 3D view,
+: LMB select in uv view, then home/. in 3d view to locate
+: use M, or Shift-M
+: green select and move and rotate before weld
+: look at Segment Fast Weld option
+== Kinks ==
+What they are, why the occur, how to get rid of them.
+: Ctrl-Shift MMB drag
+: Shift MMB drag
+: Shift B
+Internal kink
+: can check with Optimize Overlap detection
+: use 4 to shrink a bit, and then B brush
+:   turn on display4/5
+== Geometry to UVs ==
+The relationship between the flattened shapes and UV coordinates, and how that impacts on other tools such as scaling and packing.
+: so don't scale shells up and down to fit UV square, move square around to fit shapes.
+: this maintains texture density across the loaded object,
+: also across all assets but fixing the UV scale.
+: so use auto fit, or probably pack.
+: having said that, there are tools for varying the scale, hand example.
+== Green Balance ==
+Where you need to use it. plugins
+: select already flattened, click green balance
+: select rest, rescale U & V
+== Advanced Packing ==
+continue with leon and cube file
+: pack selected only
+: pack quality
+: turn on coverage %
+: rotate with 0, whats that?
+: try wrapping
+== Subdivision Surfaces ==
+ Why they need special handling.
+== Obscure Tools ==
+Niche usage, but handy to keep in mind.
+: Camera scaling
+: probably in combination with render repaint
+----
-; The core mechanic : Knowing whats going on behind the scenes can only help. Rubber toy demo.
+: Reshape (eg Phileroo),
-; Cutting : There's more than one way to skin a cat (apologies to cat lovers).
+== Easter Eggs ==
-; Geometry to UVs : The relationship between the flattened shapes and UV coordinates, and how that impacts on other tools such as scaling and packing.
+F8, F9,
+UV Sets?
-; Kinks : What they are, why the occur, how to get rid of them.
+== Pattern Making ==
-; Green Balance : Where you need to use it.
+Costume. Tip: Use Segment tool.
-; Advanced Packing : Eg wrapping
+: load edit01.uvl
+: triangles better than quads, less ambiguity
+: use segment with 0 degree
+: set scale to size of paper/material
+: if not square, make b/w mask image
+: pack with no resize and mask on
-; Subdivision Surfaces : Why they need special handling.
+: folded aluminium face test
-; Pattern Making : Costume. (see {{fig}}). Tip: Use Segment tool.
+----
-; Easter Eggs & Under Development: Shift-J, F9, UV Sets
+Harry sculpture