| View previous topic :: View next topic |
| Author |
Message |
Liz_NZ
Posts: 2
Joined: 07 Mar 2012
|
 Posted: Wed Mar 07, 2012 7:54 pm Post subject: revolving an object in ed space |
 |
|
hi
when i first load in my object from Maya, the MMB and RMB work the same as in Maya, however the LMB doesn't seem to work the same which is frustrating.
object revolves vertically ok, but not horizontally (left/right) on the pivot?
i notice after going into UV/3d space after cutting etc and coming back to the ED window seems to then work.
any ideas why?
thx
 |
|
| Back to top |
|
 |
headus
Site Admin
Posts: 2902
Joined: 24 Mar 2005
Location: Perth, Australia
|
| Posted: Wed Mar 07, 2012 8:37 pm Post subject: |
|
|
By default, UVLayout wont let you rotate something over so its upside down, so maybe you're hitting that limit somehow in combination with the Up setting being incorrect for your model.
Try setting the Display Up to "Free" so see if that helps.
Phil |
|
| Back to top |
|
|
Liz_NZ
Posts: 2
Joined: 07 Mar 2012
|
| Posted: Thu Mar 08, 2012 4:52 pm Post subject: |
|
|
the model is up the correct way in Maya, but loads upside down in the UV Layout
However, the FREE command fixes the problem - thanks  |
|
| Back to top |
|
|
headus
Site Admin
Posts: 2902
Joined: 24 Mar 2005
Location: Perth, Australia
|
| Posted: Thu Mar 08, 2012 6:21 pm Post subject: |
|
|
Great! It odd though that it comes into UVLayout upside-down; you might actually have it flipped over in Maya without realizing it.
Phil |
|
| Back to top |
|
|
|
FAQ
Search
Usergroups
Register
Profile
Log in to check your private messages
Log in
