From Headus Docs

Fig 1. Run Log

Application Debugging

Built in to all of headus' applications is the ability to write out a log of events and internal settings. This information can be very useful to us when tracking down a bug in the software, but because the log files can be large, they are turned off by default. To turn on the run log, follow these steps:

1. Bring up the licensing GUI, move the mouse pointer over the top of the Hardware Keys label, hold down the <Ctrl> key, then click the left mouse button. A new row of buttons should appear (see Fig 1).
2. Click the Run Log On button.
3. At this point you would run the application that needs to be debugged. You can either do that as you normally would, or click on the Test button alongside the application in the panel below.
4. Click the Run Log Off button. If you forget this step, then the run log will keep getting bigger and bigger as you run any of the headus applications.
5. Finally, click on the blue Run Log button to load the run log into the default text editor. From here you can save that out to a new file, then attach it to email.