From Headus Docs

Revision as of 10:09, 23 August 2010

Fig 1. PlyTool Settings

Vitronic Color Import

To import Vitronic color scans into CySize, you need to follow these steps:

1. Run PlyTool as you normally would.
2. Tick the "UV to CPV" option (see Fig 1).
3. Click the arrow and load the first color texture file.
4. Set the rotation angles to 90, 0, 90.
5. 

   Fig 2. Load OBJ
   Click the Input arrow and load the OBJ file with Meters ticked (see Fig 2). Even if you already have an OBJ loaded, you need to reload it after ticking the "UV to CPV" option.
6. Click the Output arrow and specify the PLY file as you normally would.
7. Click Convert
8. Click View, and use the 'C' key to shade the mesh with color to check the conversion.

Load the PLY file into CySize and process as you normally would and the color should end up in the final merged and filled surface. You can then use the "Place Landmarks" tool to quickly place points on all of your color markers.

Wish/Bug List

• one file missing slice through head after merging

• when we re-open the baf and restore our measurements, some of these (points and measures) are in different places, missed or even we have new curves…

• the new function to look for max and min girths changes its spot after restoring.

• generate a straight but inclined line between the two armpit markers,

• it would be beneficial to temporarily or permanently remove markers"

• Shift-T to tape measure all curves crashes.

Upload folder for Windows XP

These instructions apply to Windows XP, but should be OK for other Windows versions:

1. Open the 'My Network Places' folder. If you don't know where this is, go to 'Start -> Help' and search for 'add network place', then look for a 'My Network Places' link in the help documentation.
2. Once you have the 'My Network Places' folder open, double click 'Add a network place.'
3. When asked where you want to create the network place, select 'Choose another network location'
4. In the 'Type the location of the Network Place' text box, enter in http://www.headus.com:80/au/clients/unisa/upload
5. Enter unisa for the User name, and olds for the Password
6. In the 'Enter a name for this Network Place' text box, enter "headus Upload".
7. To complete the setup, click Finish. A Microsoft Web Folder appears showing the contents of the upload folder.

To upload files, just drag'n'drop them into this folder.

You may see two files in this directory - .htaccess and .htpasswd - when you connect to it. These files do need to be there and you won't be able to delete them, so they can safely be ignored.