Support:UniSA

(Difference between revisions)

Revision as of 06:01, 8 June 2010

Fig 1. PlyTool Settings

To import Vitronic color scans into CySize, you need to follow these steps:

Run PlyTool as you normally would.
Tick the "UV to CPV" option (see Fig 1).
Click the arrow and load the first color texture file.
Set the rotation angles to 90, 0, 90.
Fig 2. Load OBJ
Click the Input arrow and load the OBJ file with Meters ticked (see Fig 2). Even if you already have an OBJ loaded, you need to reload it after ticking the "UV to CPV" option.
Click the Output arrow and specify the PLY file as you normally would.
Click Convert
Click View, and use the 'C' key to shade the mesh with color to check the conversion.

Load the PLY file into CySize and process as you normally would and the color should end up in the final merged and filled surface.

 # Run PlyTool as you normally would.
 # Tick the "UV to CPV" option (see {{fig}}).
-# Click the arrow and select the first color texture file.
+# Click the arrow and load the first color texture file.
 # Set the rotation angles to 90, 0, 90.
 # {{img|UniSA-plytool2.jpg|Load OBJ}} Click the Input arrow and load the OBJ file with Meters ticked (see {{fig}}). Even if you already have an OBJ loaded, you need to reload it after ticking the "UV to CPV" option.