CySlice
From Headus Docs
(Difference between revisions)
| Revision as of 02:31, 15 January 2007 (edit) Headus (Talk | contribs) ← Previous diff |
Revision as of 01:36, 17 January 2007 (edit) (undo) Headus (Talk | contribs) Next diff → |
||
| Line 2: | Line 2: | ||
| ---- | ---- | ||
| CySlice allows users to fit NURBS, SUBD or Poly surfaces to dense polymeshes, such as those created from 3D scanning. Color, bump/normal and displacement maps can then be extracted, capturing all the detail of the original dense mesh in the simplified surfaces. | CySlice allows users to fit NURBS, SUBD or Poly surfaces to dense polymeshes, such as those created from 3D scanning. Color, bump/normal and displacement maps can then be extracted, capturing all the detail of the original dense mesh in the simplified surfaces. | ||
| + | |||
| + | * [[CySlice Overview]] | ||
| + | * [[CySlice Polymesh Edit / PlyEdit]] | ||
| + | * [[CySlice Polymesh Maps]] | ||
| + | * [[CySlice Measure / CySize]] | ||
| + | * [[CySlice Networks]] | ||
| + | * [[CySlice Slicing]] | ||
| + | |||
| + | * [[PlyTool]] | ||
| + | * [[PlyView]] | ||
Revision as of 01:36, 17 January 2007
New docs site still under construction. The current CySlice User Guides are found at http://www.headus.com.au/doc/cyslice.html.
CySlice allows users to fit NURBS, SUBD or Poly surfaces to dense polymeshes, such as those created from 3D scanning. Color, bump/normal and displacement maps can then be extracted, capturing all the detail of the original dense mesh in the simplified surfaces.